10/2019
PN 10900 /REVR
2
INTRODUCTION
Instructions for the Tufway portable restroom
Satellite restrooms must be assembled according to approved assembly procedures. Avoid
variations in assembly which could adversely affect product life.
The assembly procedures are written for assembly of single units. If assembling multiple
units, considerable efficiency can be gained by working in assembly line fashion.
IMPORTANT:
Do not remove shipping screw from door until instructed in the “Install the Front Assembly”
step.
TOOLS
•
RIVET GUN
•
DRILL ELEC/CORDLESS
•
3/8 NUT DRIVER BIT
•
1/4 DRILL BIT
•
DEBURRING TOOL
•
#2 PHILLIPS SCREWDRIVER OR BIT
•
APRONS (CARPENTERS)
HELPFUL HINTS
•
Have an apron with at least two large pockets that allow the parts to be remove easily.
•
Don’t open up all your kit boxes. Open up only enough kit boxes to assemble the number of
toilets you are currently working on.
KEEP PARTS ORGANIZED.
•
Use toilet paper holders for parts bins on multiple unit assembly
•
The door latch can be put on at any time. It may be more efficient to have someone do this
early on multiple unit assembly.
