The VERSA-KWRL2 wireless keypad enables operation and programming of the VERSA,
VERSA IP and VERSA Plus control panels with firmware version 1.09 (or newer). The device
is designed for work within the ABAX 2 / ABAX two-way wireless system. This manual
applies to the keypad with firmware version 3.00 (or newer), which is supported by:
ABAX 2: ACU-220 / ACU-280 controller,
ABAX: ACU-120 / ACU-270 controller (firmware version 5.04 or newer).
The ABAX 2 / ABAX controller must be connected to the communication bus of the
VERSA / VERSA IP / VERSA Plus alarm control panel.
In the ACU-220 / ACU-280 controller, switch 9 must be set in OFF position, and switch
10 must be set in ON position.
In the ACU-120 / ACU-270 controller, switch 8 must be set in ON position.
The keypad is not supported by the ARU-100 and ARU-200 radio signal repeaters.
Fig. 1. VERSA-KWRL2 keypad.
1. Features
Display 2 x 16 characters with backlight.
LEDs indicating the state of partitions and system.
12 keys, bearing designations according to telephone standard and intended for entering
data.
4 additional keys for menu navigation and arming/disarming.
