SATEL-TR489
Integration Guide, Version 0.9
2
SATEL-TR489 radio transceiver module has been designed to operate on 403-473 MHz, 856-876
MHz and 902-928 MHz, the exact use of which differs from one region and/or country to another.
The user of a radio transceiver module must take care that the said device is not operated
without the permission of the local authorities on frequencies other than those specifically
reserved and intended for use without a specific permit.
SATEL-TR489 is allowed to be used in the following countries. More detailed information is
available at the local frequency management authority.
Countries: AT, AU, BE, BG, CA, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, HR, IE, IS, IT, LT, LU,
LV, MT, NL, NO, NZ, PL, PT, RO, SE, SI, SK, TR, US
This integration guide applies to the combination of Firmware/Hardware version listed in the
table below. See www.satel.com for the newest firmware and Integration Guide version.
Firmware version
Hardware version
Note!
7.x.2.x.x.x and
7.x.3.x.x.x
SPL0076c
RESTRICTIONS ON USE
–
SATEL-TR489
WARNING
–
RF Exposure! To comply with RF exposure compliance requirements in
Europe maximum antenna gain is 14dBi and a separation distance of at least 1 meter
must be maintained between the antenna of this device and all persons.
WARNING! Users of SATEL-TR489 radio transceiver module in North America should
be aware, that due to the allocation of the frequency band 406.0
–
406.1 MHz for
government use only, the use of radio transceiver module on this frequency band
without a proper permit is strictly forbidden.
WARNING - RF Exposure
To comply with FCC and IC RF exposure compliance requirements, maximum antenna
gain is 14 dBi and separation distance of at least 1 meter must be maintained
between the antenna of this device and all persons. This device must not be co-
located or operating in conjunction with any other antenna or transmitter.
