
SATELLINE-3AS NMS / Epic NMS / VHF
User Guide, Version 3.0
19
2.3
SATELLINE-3AS(d) VHF Technical specifications
SATELLINE-3AS(d) VHF complies with the following international standards:
EN 300 113-1,-2*
1
, EN 301 489-1,-5, EN 60950-1 and FCC CFR47 part 90.
RADIO TRANSCEIVER
Frequency Range
Channel Spacing
Number of Channels
Frequency Stability
Type of Emission
Communication Mode
135...174 MHz (135…155, 138…160 and 155 … 174
MHz variants) 218…238 MHz
12.5 / 25 kHz
1600 / 800
< ± 650 Hz
F1D
Half-Duplex
RADIO TRANSMITTER
Carrier Power
Carrier Power Stability
Adjacent Channel Power
Spurious Radiation
100 mW, 500 mW, 1 W, 5 W / 50 ohm
+ 1.5 dB / - 1.5 dB
according to EN 300 220 / EN 300 113 and CRF47 part90
according to EN 300 220 / EN 300 113
RADIO RECEIVER
Sensitivity
Common Channel Rejection
Adjacent Channel Selectivity
Intermodulation Attenuation
Spurious Radiation
- 115... –110 dBm (BER < 10 E-3)
*
2
> -12 dB
> 50 dB @ 12,5 kHz, > 60 dB @ 25 kHz
> 60 dB
< 2 nW
MODEM
Interface level
Interface
Interface Connector
Data Speed of Serial Interface
Data Speed of Radio Interface
Data format
RS-232 or RS-485, RS-422
One port for data and one for NMS
D15, female
1200 – 38400 bps
19200 bps (25 kHz channel)
9600 bps (12.5 kHz channel)
Asynchronous data
GENERAL
Operating Voltage
Power Consumption (average)
Operating Temperature Range
Antenna Connector
Housing
Size H x W x D
Installation Plate
Weight
+ 9 ...+ 30 V
DC
1.7 VA (Receive), 6.6 VA (Transmit at 1W)
0.07 VA (in
Standby Mode
)
-25 °C...+55 °C
TNC, 50 ohm, female
Aluminium enclosure
137 x 67 x 29 mm without a heat sink
137 x 80 x 56 mm with a heat sink
130 x 63 x 1 mm
265 g without a heat sink
550 g with heat sink
*
1
Full compliance with the Tx parameter limits. Please refer to specifications above
for minor deviations from Rx parameter limits.
*
2
Depending on Receiver settings