Satel SATEL-TR49 SnapOn Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 65

Satel SATEL-TR49 SnapOn Скачать руководство пользователя страница 5

SATEL-TR49

Integration Guide, V 1.7

4

PRODUCT CONFORMITY

Hereby, SATEL Oy declares that SATEL-TR49 radio transceiver module is in compliance with the
essential requirements (radio performance, electromagnetic compatibility and electrical safety)
and other relevant provisions of Directive 2014/53/EU. Therefore, the equipment is labeled with
the following CE-marking.

For 902-928 MHz only:

This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device. Changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

«
...
3
4
5
6
7
...
»

Содержание SATEL-TR49 SnapOn


































































Отзывы:

Нет отзывов