SATEL PK-01
1
The PK-01 module is designed for single door control. The access control is effected by
means of electric control of the door status and user identification functions.
1. Features
Support for up to 50 proximity cards (wherever the word "card" is used in this manual, it
means a passive transponder, which may take the form of a proximity card, proximity tag,
etc.), and for 50 codes.
Programming the module and managing the cards and codes by means of the
administrator code.
Ability to block and unblock the door by users with suitable authority level.
Keypad with backlight.
Bell
button.
Built-in reader for cards, tags and other 125 kHz passive transponders.
LED indicators of the door and module status.
Built-in piezoelectric transducer for sound signals.
Relay output for control of electromagnetic lock, gate controllers or other devices to
activate the door.
2 OC type outputs:
– indication of alarm status;
– bell
signal.
2 dedicated inputs to connect:
– door status sensor;
– request-to-exit
button/device.
Enclosure suitable for outdoor installation.
Tamper protection in 2 ways – cover removal and tearing enclosure from the wall.
Powered by 12 V DC (±15%).
2. Description
2.1 LED indicators
red
ON
– alarm (signaling lasts 10 seconds);
blinking
– alarm memory (signaling lasts until a code is entered or
a card is read in by any user).
The alarm can be caused by:
forced
entry,
3 attempts to get access using unknown identifier (code or card),
module
tamper.
green
ON
– the door is unblocked (permanently unlocked),
blinking
– the door is unlocked (the user has gain access).
yellow
ON
– the door is blocked (permanently locked).
