6 INT-RX
SATEL
4. Click on the W
RITE
button to write the data to the module(s). The background color of the
field where the serial number is displayed will change to white.
3.1.3 Removing a key fob by means of LCD keypad
1. Start the R
EM
.
R
X
K
EY
F
OB
function ([installer code]
Æ
M
ASTERS
Æ
N
EW MASTER
/E
DIT
MASTER
Æ
R
EM
.
R
X
K
EY
F
OB
or [code]
Æ
U
SERS
Æ
N
EW USER
/E
DIT USER
Æ
R
EM
.
R
X
K
EY
F
OB
).
2. After the key fob number is displayed, press the
key.
The key fob will only be removed from the system after completion of the
master/user editing function, i.e. after you exit the function by pressing the
key and save the made changes by pressing
.
3.1.4 Removing a key fob by means of
D
LOAD
X
program
1. Open the K
EYFOBS
INT-RX window (see Fig. 2).
2. Click on the R
EAD
button. The program will read out and display the data from the module.
3. Click your mouse on the field in the S/N column, next to the name of the user whose key
fob you want to remove.
4. Click on the R
EMOVE
.
5. In the window which will be displayed, click on the Y
ES
button to confirm your intention to
remove the key fob. This will delete the key fob serial number. The background color of
the field where the serial number is displayed will change to pink.
6. Click on the W
RITE
button to write the data to the module(s). The background color of the
field where the serial number is displayed will change to white.
3.2 Controlling zones
In case of the INTEGRA control panels, the function is effected by controlling the zone status
in the system. By using a key fob you can control up to 6 zones in the security alarm system.
The zones should not physically exist and the type of line programmed for them must be
different from N
OT USED
and F
OLLOW OUTPUT
.
You can program any function for these zones.
Pressing a key (or, simultaneously, two keys: 1 and 2 or 1 and 3) in the key fob will result in
violation of the zone (the zone will be violated as long as the key fob button is held down) and
a corresponding reaction of the control panel.
A button/combination of buttons can control one zone in the system. The zones are
individually assigned to the buttons/button combinations for each user. It can be done by
means of the LCD keypad or D
LOAD
X program.
Pressing any button/combination of buttons in the key fob will generate an event informing
that a key fob has been used. In case of working in conjunction with the INTEGRA control
panel with firmware in version
1.06 or later, generating such events can be enabled or
disabled, so as to reduce the number of events in the system.
Note:
The dependencies between key fob buttons and alarm system zones, which have
been defined for a user, will not be deleted after the key fob is removed (the only
exception being the R
EM
.
RX
K
EY
F
OBS
function, available in the service menu of LCD
keypad). After a new key fob is added to the user, its buttons will control exactly the
same zones as those controlled by the buttons of removed key fob.
3.2.1 Assigning a zone to the button by means of LCD keypad
In LCD keypad, zones can be assigned to a button/combination of buttons by means of the
functions available when adding/editing administrator ([installer code]
Æ
M
ASTERS
Æ
N
EW
