4 INT-RX
SATEL
possible to erase all key fob data in the INT-RX expansion modules connected to the control
panel. The same also applies to the information about zones assigned to the push-buttons in
individual users' key fobs. Removal of the key fob in any other way will not reset the push-
button settings.
3.1.1 Adding a key fob by means of LCD keypad
You can add key fobs by using the N
EW
R
X
K
EY
F
OB
function ([installer's code]
Æ
M
ASTERS
Æ
N
EW MASTER
/E
DIT MASTER
Æ
N
EW
R
X
K
EY
F
OB
or [code]
Æ
U
SERS
Æ
N
EW USER
/E
DIT USER
Æ
N
EW
R
X
K
EY
F
OB
).
Actually, the key fob will only be added to the system after the function of
adding/editing administrator or user is completed, i.e. after the function is exited
by using the
key and the made changes are saved by pressing the
key.
Entering the serial number manually
1. Select ENTER MANUALLY from the list.
2. Enter the key fob number and press the
key.
Reading the serial number during transmission
1. Select from the list the INT-RX module, by means of which a key fob is to be added.
2. Following the prompts displayed on the keypad, press the key fob button twice, and, when
the K
EY FOB READ
message appears, press
.
3.1.2 Adding a key fob by means of
D
LOAD
X
program
You can add key fobs by using the K
EYFOBS
INT-RX window (see Fig. 2). To open the
window, click on the K
EYFOBS
INT-RX item in the U
SERS
menu, or on the E
DIT KEYFOBS
button, which is available after selecting the INT-RX expansion module from the list of
devices (tab H
ARDWARE
, window S
TRUCTURE
). Prior to adding a new key fob, you have to
read the data from the module. In order to do so, click on the R
EAD
button. This will update
the information presented in the K
EYFOBS
INT-RX window. The name(s) of the module(s), the
control panel can communicate with (displayed at the top of the window – see Fig. 2), will be
highlighted in green.
Notes:
•
After you click on the R
EAD
button, the program will read data from the INT-RX expansion
module having the lowest address. You should take this into consideration when
connecting new expansion modules to the control panel.
•
When you click on the W
RITE
button before entering any change to the read data, the data
read from the expansion module having the lowest address will be written to all modules.
This function is useful when connecting new INT-RX expansion modules to the system in
which such modules are already functioning. It enables the key fob related data to be
synchronized (similarly as with the C
OPY
R
X
K
EYFOBS
function, available in the service
menu of the LCD keypad).
•
Where several INT-RX expansion modules are interfacing with the control panel, the loss
of communication with any of them will render the writing of key fob data to any module
impossible.
Entering the serial number manually
1. Click your mouse on the field in the S/N column, next to the name of the user to whom
you want to assign a key fob.
