SATEL INT-KNX
5
4. Programming the module
The module can be programmed by means of:
−
LCD keypad: S
ERVICE MODE
X
S
TRUCTURE
X
H
ARDWARE
X
E
XPANDERS
X
S
ETTINGS
X
[module name]
;
−
computer running D
LOAD
X program:
"Structure" window
Æ
"Hardware" tab
Æ
"Expansion
modules" branch
Æ
[module name]
.
Note:
Some parameters can only be programmed with the D
LOAD
X program.
4.1 Parameters and options
Some of the parameters and options are stored in the control panel memory, and some of
them in the module memory. Prior to programming the module with the D
LOAD
X program, use
the "Read" button to read data from the module (see Fig. 5). The program can suggest
reading the data itself when you click on the module name in the "Structure" window,
"Hardware" tab. After programming, use the "Write" button to save the data to the module
(see Fig. 5). The "Read" button is not intended to read the data from the control panel and
the "Write" button – to write the data to the control panel.
Fig. 5. Programming the INT-KNX module parameters and options in the D
LOAD
X program.
You can restore the factory settings to the parameters and options stored in the module
memory by using the "Reset" button in the D
LOAD
X program or the F
ACTORY SETS
function in
the keypad.
