Satel ASW-210, Руководство пользователя

Страница: 4 / 7

2 ASW-210 SATEL
Minimum breaking capacity.............................................................................................50 mW
Contact resistance ........................................................................................................
≤ 100 Ω
Electrical life (number of cycles) – AC1 (360 cycles/hour) ................................................ > 10
5
Complied with standards....................................................................EN 50130-4, EN 50130-5
Environmental class according to EN50130-5 .........................................................................II
Operating temperature range...............................................................................-10°C...+55°C
Maximum humidity ..........................................................................................................93±3%
Dimensions .................................................................................................. 47 x 47.4 x 22 mm
Weight.................................................................................................................................40 g
3. Description
The controller takes up two positions on the list of wireless devices (optionally, it can occupy
one position).
button for registering the controller to the ABAX 2 / ABAX system.
rating plate.
Wires
N
[blue] - for connecting 230 V AC supply neutral wire.
L
[brown] - for connecting 230 V AC supply phase wire.
NO1
[gray] - NO contact of the relay output 1 (normally it is disconnected from the
common contact C – does not conduct electricity).
NO2
[black] - NO contact of the relay output 2 (normally it is disconnected from the
common contact C – does not conduct electricity).
C
[red] - common contact C of the relay outputs.
Terminals
SW1, SW2
- control input (NO).
N’
- for connecting 230 V AC supply neutral wire.
Radio communication
The ASW-210 controller connects to the ABAX 2 / ABAX controller / control panel at regular
time intervals to provide information about its status (periodical communication). Additional
communication takes place when the ASW-210 controller:

informs the ABAX 2 / ABAX controller / control panel that an input state has changed,

acknowledges receiving a command (to turn a relay ON/OFF) from the ABAX 2 / ABAX
controller / control panel.