4 AOD-200
SATEL
Be particularly careful during installation and replacement of the battery. The
manufacturer is not liable for the consequences of incorrect installation of the
battery.
The used batteries must not be discarded, but should be disposed of in
accordance with the existing rules for environment protection.
If the detector is to be pet immune, it should be mounted at 2.4 m height with no
vertical tilt. It is especially important when mounting on a ball bracket.
Install the detector at the recommended height (Fig. 3-I).
If traffic nearby or objects moving out of the protected area cause an alarm, move the
detector slightly downwards or reduce the detector sensitivity (Fig. 3-II).
Install the detector so that the expected movement of an intruder will be across the
coverage pattern (Fig. 3-III).
Don’t install the detector closer than 3 meters from the moving objects (eg. tree branches,
bushes, laundry etc.) (Fig. 3-IV).
Don’t direct the detector on reflective surfaces or on fans or a heat sources (Fig. 3-V).
If tamper switch wires are to be run into the enclosure, it is advisable to put them in
heat shrink tube. It reduces the risk of getting water into the enclosure.
1. Remove the front cover (Fig. 4).