4
ACCO NET
SATEL
running on your computer, smartphone or tablet. An example of the ACCO NET system is
shown in Fig. 1.
4. Network requirements
•
Internet protocol version 4 (TCP/IPv4).
•
IP address for each connected ACCO-NT control panel.
•
If the ACCO-WEB application is to be accessible from another subnet, the web port (https;
default: 443), on which communication between ACCO Server and ACCO-WEB
application is to take place, should be redirected.
•
If the ACCO Soft program is to be accessible from another subnet, the following ports
should be redirected:
– RMI port (default: 2500), on which communication between ACCO Server and ACCO
Soft program is to take place,
– DB port (default: 3306), on which communication between ACCO Server and database
is to take place.
Despite the standard encryption techniques (SSL) being used by Satel, if the
ACCO NET system is connected to a public network, additional security
measures must be used, including e.g. a firewall, intrusion detection and
prevention systems (IDS / IPS).
5. Suggested hardware requirements
Hardware requirements for the device on which the ACCO NET access control system will be
installed depends on the system size:
exemplary system 1
(1 ACCO-NT control panel, 30 access control modules, 30 users)
– RAID (redundant array of inexpensive disks) level 1 (requires at least two hard drives),
– 4 GB of RAM memory,
– processor: Intel Core i3 or AMD A4,
– network card, Fast Ethernet standard,
– Debian 8 (“jessie”) operating system for the 64-bit PC (amd64) architecture.
exemplary system 2
(3 ACCO-NT control panels, 100 access control modules, 300 users)
– RAID (redundant array of inexpensive disks) level 5 (requires at least three hard drives),
– 8 GB of RAM memory,
– processor: Intel Xeon or AMD Opteron,
– network card, Fast Ethernet standard,
– Debian 8 (“jessie”) operating system for the 64-bit PC (amd64) architecture.
Components of the device on which the access control system will be installed must
meet the requirements of the Debian 8 operating system (“jessie”) for the 64-bit PC
architecture (amd64).
One of the installed disks must have at least 7 GB of free space for installation of the
ACCO NET system. The size of the remaining disks to be installed must be selected
taking into account the following:
–
number of events generated in the system (2 to 5 millions events will occupy
1 GB),
