32 ACU-220
SATEL
consumption by wireless devices: the less frequent is the communication, the lower is the
energy consumption. For the battery-operated devices it means longer battery life.
Moreover, when the communication takes place less frequently, more wireless devices
can work within each other's operating range.
If you enable the “ECO” option for a wireless device, periodical communication
between that device and the controller will take place every 3 minutes (the
“Communication period” parameter will have no effect on the device operation).
Some information and commands need to be sent immediately. Therefore, additional
communication takes place when the device reports tamper, when the detector reports
alarm, etc.
Fig. 20. DLOADX
program: parameters and options of the controller connected to INTEGRA /
INTEGRA Plus control panel.
Higher sensitivity for jamming detection
[High jam sens.] – if this option is enabled, the
sensitivity of detection of radio communication jamming is boosted.
No automatic update of wireless devices firmware
[No updates] – if this option is enabled,
the firmware of wireless devices registered in the controller is not updated automatically
(see “Updating the firmware of ABAX 2 wireless devices” p. 54).
User can replace VERSA-LCDM-WRL battery
– if this option is enabled, all users can
replace battery in the VERSA-KWRL2 wireless keypads (for 3 minutes after the code is
entered and confirmed with the
key, the status of tamper switch will not be monitored
on the keypad that was used to enter the code). If the option is disabled, the battery can
only be replaced by the users who have access to the “Replace bat.” function in the
“0.Service” submenu.
