Satechi Wireless Mini Router Скачать руководство пользователя страница 3

Страница: 3 / 3

RESET

If you wish to change the mode of your Wireless Mini Router or access the Router’s

settings page, first you must reset the Router to its factory default. The following

steps will guide you through this process.

1. With the Mini Router plugged into an outlet, locate the small “Reset” button on the

side of the Router. Using a paper clip or similar small point, press and hold the reset

button for approximately three seconds (using long counts: one one thousand, two

one thousand...etc).

2. Release the reset button, then immediately press and hold it again until the WPS

light on the Mini Router briefly flashes (about eight to ten seconds).

3. Unplug the Mini Router from the outlet, wait five seconds, then plug it back in.

Repeat the steps from Section A “Setup” of this guide to access the Wireless Mini

Router’s settings page.

If you have any other questions about the Wireless Mini Router or any other Satechi

products, please contact our support team:

Phone: 1 (858) 268 1800

Email: [email protected]

www.satechi.net

www.facebook.com/satechi

Содержание Wireless Mini Router

Страница 1: ...g up Once connected to Wireless N in your internet browser navigate to the address 192 168 10 253 If prompted to enter a username and password enter admin in both fields This will direct you to the Mi...

Страница 2: ...n only an ethernet connection is available The Mini Router connects to the internet via ethernet cable and converts the wired signal to a wireless signal broadcasting a wireless network with the SSID...

Страница 3: ...ee seconds using long counts one one thousand two one thousand etc 2 Release the reset button then immediately press and hold it again until the WPS light on the Mini Router briefly flashes about eigh...