
Le 17/02/09 9/9 U508103-e Révision : 3
1.7
Assembly the system of order ( Fig.6, 7 and 8 )
- Assembly 2 o’rings (18) on the axle (19).
➥
to make sure that there are no arrises on the axis which can cause the
deterioration of the joints.
- Put grease on the hole of the body.
- Installation of the lever of order (20).
- Installation of the axle (19).
- Assembly the pin (21).
- Assembly the cover (22) with his gasket (23).
➥
To fix the whole by 4 discs and 4 screws.
- Assembly the lever (24) and to fix the pin.
- Control of functioning.
➥
No hard point must be detected during the use of the lever.
- Assembly the spring of the valve (25), the valve (26) and the seat of valve (27) after
having lubricated the joints.
- Installation of the valve.
- Installation of the case of order.
- Control mechanical operation without hard point.