125
EN
Operating instructions
SATAjet K 1800 spray mix
Operating instructions
SATAjet K 1800 spray mix
rial nozzle under high pressure. The material nozzle geometry defines the
spray height and the spraying angle. The spray fan pattern can be adjust-
ed by adding more compressed air at the air cap.
5. Scope of Delivery
■
Spray gun without material nozzle
■
Universal spanner
■
Depending on the variant:
material strainer 100 msh (fitted in the material filter housing)
■
Operating Instructions
After unpacking, check:
■
Spray gun damaged
■
Complete scope of supply
6. Technical Design
SATAjet K 1800 spray mix
[1-1]
Suspension hook with
suspension hole
[1-2]
Fully variable round/flat fan
control
[1-3]
Closing screw
[1-4]
Spray gun body
[1-5]
Trigger lock
[1-6]
Compressed air connection
[1-7]
Trigger
[1-8]
Material connection
[1-9]
Contact protection
[1-10]
Nozzle set with air cap,
material nozzle and
pre-nozzle (material nozzle
not included in scope of
delivery)
SATAjet K 1800 spray mix (with material filter, short) [1-15]
[1-30]
Material connection
[1-31]
Material filter housing, short
[1-32]
Colour tube
SATAjet K 1800 spray mix (with material filter, long) [1-11]
[1-28]
Material connection
[1-29]
Material filter housing, long
[1-18]
paint pipe
7. Technical Data
Recommended gun input pressure (air)
0.5 bar - 3.0 bar
7 psi - 44 psi
Manual_SATAjet-K-1800-spray-mix 26-sprachig.indb 125
Manual_SATAjet-K-1800-spray-mix 26-sprachig.indb 125
29.10.2021 13:54:00
29.10.2021 13:54:00