SATA SATAjet 1000 Series, Руководство по эксплуатации

Страница: 41 / 60

<< Operating Instructions SATAjet 1000-110/-111/-120/-121 >> << Operating Instructions SATAjet 1000-110/-111/-120/-121 >>
EN
III.7
<< English >>
inlet pressure per every 10 m of air hose (inner width 9 mm).
7.2. Adjustment of the Material Flow
[4-1], [4-2], [4-3]
und [4-4] - material flow control fully opened
Notice!
With the material flow control fully opened, the wear of the fluid tip and
paint needle is reduced to a minimum. Please select the correct nozzle
size depending on the material to be applied and the required applica-
tion speed.
7.3. Adjustment of the Spray Fan Pattern
• Adjust flat fan (factory setting)
[5-1]
.
• Adjust round fan [5-2] .
7.4. Painting
Fully pull trigger for painting [6-1] . Operate spray gun according to [6-2] .
Maintain spray distance as described in chapter 2.
8. Cleaning of the Spray Gun
Warning! Attention!
• Prior to cleaning, please disconnect the spray gun from the com-
pressed air circuit!
• Risk of injury due to unexpected leakage of compressed air or mate-
rial!
• Empty spray gun and gravity flow cup completely, dispose of paint
material appropriately!
• Disassemble and install components very carefully! Exclusively use
included special tools!
• Use neutral cleaning solution (pH value 6 to 8)!*
• Do not use acids, lyes, pickling agents, unsuitable re-
claimed materials or other aggresive cleaning media, such
as Toluol, for example!*
• Do not soak spray gun in cleaning solution!*
EN-BAL-SATAjet 1000 -111 -121.indd 7 29.10.2012 12:11:06