90795
4
EN
中文
DE
RU
KO
PT
JA
ES
1000LM / 3.5 h
500LM / 7 h
180
°
Swivelling Handle
180°
Water Resistance:
IPX4
IP
X4
IP
X4
Run Time
3.5-30 hrs
Charge Time:
about 3.5hrs
4400mAh
109
177
180°
225°
a
b
d
f
c
e
109
177
180°
225°
a
b
d
f
c
e
Rotation angle
of handle:
Notice:
- The battery is not fully charged at delivery, and thus be sure to fully charge it
before its first use. Before charging, make sure the LED light is not working.
- During charging, if the charging indicator flashes, it suggests that the
charging is normal. When the fourth indicator stops flashing and stays on, it
indicates that the current battery level of the light is 100%.
- If the product is not used for a long time, fully charge the battery every 6
months to maintain its performance.
- Always use the dedicated adapter and USB charging cable with the specified
parameters for charging the product; otherwise it may damage the product
and bring risks to personal safety.
- The battery life is determined by the test of a fully-charged new battery at
normal temperature (20
°
C).
- Open the charging interface before charging. Avoid charging the product in
an environment prone to water entry, such as in the rain, sauna or shower
room.
Operating conditions:
- The operating temperature is recommended to be within 0-20
℃
, and the
allowable operating temperature should be within -10
℃
to -40
℃
, and if the
product is used at a temperature out of these limits, reduced service life and
even product damage may ensue.
- Keep the product away from heat sources. Do not use it in an environment
exposed to high temperature, corrosive gases or corrosive liquids.
- The IP rating of the product is IP54, indicating that a proper amount of water
spray is allowed but immersion in water is prohibited.
Location of components:
a. Battery level indicator
b. Main light
c. Rotatable handle
d. USB charging interface
e. Main light button
f. USB output interface
Water-proof Rechargeable Flood Light
Warning
:
- Do not directly stare at the light source; otherwise it
may cause eye damage.
- Although short-circuit protection is provided for the
battery, it is prohibited to charge the product near a
heat source or in a corrosive or acidic environment;
otherwise it may result in short circuit, which would
damage the product or bring risks to personal safety.
(Fig. 1)
(Fig. 2)
Components and functions:
S/N
Name
LED
Activation means/
operation method
Purpose
Hidden function
Lumen
Battery life
(fully charged)
a
Battery level
indicator
SMD*4
Press button e.
When button e is pressed, the system detects the
current battery level. Each indicator represents a
percentage of current battery level
(100%-75%-50%-25%).
When the LED that represents 25% battery level is flashing, it
indicates that the battery needs charging.
/
b
Main light
COB
Press button e.
It is used to activate the main light.
When light level 1 is activated via the button, the battery level
indicator goes on.
/
When light level 2 is activated via the button, the main light is on at
100% luminance.
1000
3.5hrs
When light level 3 is activated via the button, the main light is on at
50% luminance.
500
7hrs
The top light flashes when the Start switch is in the fourth position
/
/
If the button is pressed and held with main light on, the stepless
luminance adjustment will be activated, and when the luminance
is adjusted to the maximum or minimum level, the corresponding
indicator will flash for indication.
50
30hrs
c
Rotatable handle
/
Rotate it by 225
°
(Fig. 2)
It is used as a support when the product is to be placed
on a plane
Its angle can be adjusted as needed/it can also be used as a lifting
handle when the flood light is used for long-distance illumination
/
/
d
USB charging
interface
/
Pull it out for
charging the
battery.
Allowed charging voltage and charging current:
5V, 0.5-2A.
5V 2A (max. charging current)
About 3.5hrs
(via a 2A charger)
e
Main light button
/
Press the button.
It is used to switch the light to different light levels
It can also be used to detect the battery level (anti-touch) and to switch the light to high-light level position/
low-light level position/OFF position
Press and hold the
button.
The main light operates at the maximum or minimum
luminance level.
Press and hold button e to adjust the light to a desired luminance level (i.e., stepless adjustment).
f
USB output
interface
/
USB output (5V 2A)
It is used for emergency charging of any electronic
products
5V 2A
/
Emergency charging
Warranty:
This item is consumable, and is not covered under SATA lifetime warranty.
