SATA 02002A, Руководство пользователя

Страница: 24 / 140

中文
EN DE RU KO PT JA ES 02002A
24
3.3 Parameter Settings
3.3.1 Password Setting
* The default password of the soldering station is "000", and temperature setting of soldering station is available under this state. To limit
the permission for temperature adjustment, change the password.
1
）
Enter the password change mode:
Turn off the power switch on the soldering station, press and hold the "
△
" and "
▽
" keys at the same time, and press the
power switch to connect the power supply, and then display shows , indicating that the machine enters the password
modification mode.
2
）
Enter the default password correctly:
After entering the password change mode, press the key once to display . At this time, press the "
△
" or "
▽
" key to
enter the default password and then press the * key.
a. When the entered password is wrong:
The display shows the current set value for about 4 seconds, and then the soldering station returns to the normal working state.
Since the entered password is wrong, you cannot set the temperature
（
Set Temp
）
.
b. When the entered password is correct:
If the display shows , it means the entered password is correct. The display will show the current set value for about 4
seconds, and then the soldering station returns to the normal working state, , and you can set the temperature
（
Set Temp
）
.
3
）
Enter a new password:
Only when the two passwords you entered match can the new password be saved in the memory of the soldering station and the
password be changed successfully
（
the specific operation is as follows
）
a. Enter your new password for the first time:
When the password entered is correct, the window displays . Press the "*" key and "
▽
" key simultaneously within 4
seconds, and then the appears, indicating that you can input a new password now. Press the "*" key, and then the
appears on the window. Press the "
△
" or "
▽
" key to change the entered password.
b. nter your new password for the second time:
Press "*" again, and then the window displays , indicating that you need to enter the new password for the second
time. Press "*", and then the window display the ; and press "
△
" or "
▽
" to enter your new password.
c. When the two passwords you entered match:
If the new passwords entered in the last two times are the same, press the "*" key. Then, the password will be changed
successfully and the new password will be saved in the memory.
d. When the two passwords you entered does not match:
If the passwords entered in the last two times are different, press the "*" key, and then the window will display the . In
this case, you must enter a new password again until the passwords entered in the last two times are the same; otherwise, the
password cannot be changed successfully.
3.3.2 Temperature setting
Note:
* Only when the temperature adjustment of the soldering station is available can the temperature be set
（
the default
password is 000, or the correct password is entered under the password protection mode
）
. Press the "
△
" and "
▽
" keys
to set the temperature.
* If you turn off the power switch while setting the temperature, the set temperature will not be saved.
Caution:
When the temperature of the soldering bit is above 500
°
C, it is likely to damage the soldering iron. Set the temperature as low
as possible.