10
Important notes before first use, installation and maintenance:
Before use, carefully read the manual not only for the thermostat, but also for the heating device (heat pump, etc.) •
Turn off the power supply before installing the thermostat! • We recommend that the installation is done by a qualified
electrician • the electrical circuit must be secured with a fuse that does not exceed the current load of the wiring (max
16 A) • Please note all safety instructions before installing • Do not expose the product to direct sunlight, extreme cold,
humidity and sudden temperature changes. This would reduce the accuracy of the temperature measurement • Do not
place the product in places that are prone to vibrations and shocks - this can cause damage • Do not expose the
product to excessive pressure, shock, dust, high temperatures or moisture, as these can cause damage to one of the
functions product, shorter energy endurance, damage to batteries, and deformation of plastic parts. • Do not expose
the product to rain or moisture, dripping or spraying water. • Do not place any sources of fire on the product, for
example, spark plugs etc. • Do not place the product in places where there is insufficient air circulation. • Do not insert
any objects into the ventilation openings. • Do not interfere with the internal electrical wiring of the product. It may be
damaged and therefore terminate the warranty. The product must only be repaired by a trained specialist. • Use a
moderately moistened cloth for cleaning. Do not use solutions or cleaning products - may damage plastic parts and
electrical wiring • Do not immerse the product in water or other liquids. • Do not repair it yourself if the product is
damaged or defective. Put it in the repair shop where you bought it • The product should not be used by a person
(including children) by physical, sensory or mental disability or lack of experience and knowledge impeded by the safe
use of the device if they are not controlled, or if they were not informed by the person responsible for their safety about
the use of the device • Children's control is necessary to ensure that they do not play with the device.
Declaration of conformity has been issued for the product. This and other documentation is available on the website
www.sen-controls.eu.
The manufacturer of this product is SASWELL CONTROLS (HONGKONG) LTD.
Importer and distributor for Saswell is Sen Controls d.o.o., Belokranjska cesta 29, 8340 Črnomelj, Slovenia
