SAS RM-MT330-2, Инструкция по эксплуатации

Страница: 49 / 63

GB
18
WARNING!
The brush cutter is fitted with a two-stroke engine, so no need fill oil separately. Fill the
oil mixed with fuel, please consult below section .
Check the cutting attachment, never use blades that are dull, cracked or damaged.
Make sure the handle and safety features are in good working order. Never use a machine that
lacks a part or has been modified outside its specifications.
The enclosures must be correctly fitted and undamaged before you start the machine.
WARNING!
Please always use quality gloves, foot, ear and eye protector. They should with CE mark and
tested according to PPE (Person Protective Equipment) directive.
The poor equipment may reduce the protection and result in person injure during working.
Engine fuel
WARNING!
The brush cutter is fitted with a two-stroke engine; use fuel mixed with oil only.
Only fuel the machine in well-lit areas. Avoid fuel spillage. Never refuel the machine during
operation. Let the engine cool down for about two minutes before refueling.
Refueling must not be carried out near naked flames, control lamps or spark producing
electrical equipment such as electric tools, welders or sanders.
1.
Make sure the machine is turned off, by turn the Ignition switch (15) to the “off” position.
2. Check the fuel by a visual check , remove the fuel tank cap and reviewing the fuel level.
3. Full unleaded fuel mixed with oil from an approved fuel container into the fuel tank, because
of fuel expands, please fill the tank to the neck of tank only.
4. Turn the fuel tank cap clockwise to assembly it in position.
WARNING!
●
Do not refill fuel while engine is running or hot.
●
Make sure fuel is not leaking.
Use quality two-stroke oil and make a mixture of 40 parts petrol to one part oil only (2, 5% oil
mixed in fuel).
Never use two-stroke oil intended for water-cooled engines.
Never use oil intended for four-stroke engines.
A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time
of catalytic converters.
Shake the container well to obtain a correct mixture before filling the tank.