13
Balance Operating
Program
The balance operating program lets you adapt your
balance to various ambient conditions and requirements.
At the factory, we have set the codes for a Standard program,
which is protected by a locking function to prevent accidental
changes.
The
"menu code"
contains the information of the operating
program, lt consists of three digits, known in "computerese" as
the page (1st digit), the line (2nd digit) and the word (3rd digit).
How to access the menu of the balance operating program:
With the balance switched off (
STANDBY
state) hold down the
tare control
(11)
and briefly press the ON/OFF key
(9)
. Upon
completion of the automatic self-test, release the tare control as
soon as
"CH5"
is displayed. Now the Status of the balance op-
erating program will appear in the weight display
"L"
Stands for
the list mode. In this mode, you can check the menu code set-
tings, but you cannot program new codes.
lf you wish to change a program menu code, you must first
unlock the menu access switch to access the menu.
To do so, remove the protective cover located on the rear panel
of you r balance (next to the power receptacle), and slide the
menu access switch
(2)
in the direction of the arrow.
The display will indicate
"C"
, which Stands for the change
mode, meaning you can now change the menu code settings.
