Leveling the Weighing Platform
Purpose:
– To compensate for uneven areas at the place of
installation
– To ensure that the equipment is placed in a perfectly
horizontal position for consistently reproducible
weighing results
Always level the weighing platform again any time
after it has been moved to a different location�
§
Level the weighing platform using the four leveling
feet� Turn the feet until the air bubble is centered
in the level indicator�
§
Check to ensure that all leveling feet rest securely
on the work surface�
> Each of the leveling feet must support an equal
load�
> Adjusting the leveling feet:
To raise the weighing platform, extend the leveling
feet (turn counterclockwise)�
To lower the weighing platform, retract the leveling
feet (turn clockwise)�
5
For the User
– Always make sure the equipment is
disconnected from AC power before
performing any installation, cleaning,
maintenance or repair work on the scale�
– If you see any indication that the scale
cannot be operated safely (for example,
due to damage), disconnect the scale
from AC power and prevent use of the
equipment for the time being�
– Chemicals (e�g� gases or liquids) that can
corrode and damage the inside or outside
of the device must be kept away from the
equipment�
Handle the equipment and any accesso-
ries in accordance with the IP rating (IEC/
EN 60529)�
– The casing on all connecting cables, as
well as the casing on wires inside the
equipment housing, is made of PVC or
rubber�
– The permitted ambient temperature range
during operation is 0°C to +40°C�
Make sure that the equipment is prop-
erly ventilated to prevent the buildup of
excessive heat�
– Only use original Sartorius spare parts�
– Never use a hammer to close a paint can
while is it still on the load plate, as this
will damage the weighing system�
