Sartorius EVO1X, Руководство по эксплуатации

Страница: 6 / 71

6 Operating Manual EVO1X | LAB1X
Safety
2.2 Installation Instructions
Do not operate the scale if its housing, the ex-link converter, or the AC adapter
including all connections are damaged.
Immediately disconnect the damaged device from the power.
Do not expose the scale, the ex-link converter, the AC adapter, or the accessories
supplied by Sartorius to extreme temperatures, aggressive chemical vapors, moisture,
shocks, vibrations, or strong electromagnetic fields. Observe the conditions of
operation described in the Specifications.
The connection cables between the devices as well as the casing on the wires inside
the device housing are made of PVC. Chemicals that corrode this material must be
kept away from these cables.
The operator shall be solely responsible for any modifications to the equipment and
for connecting any cables or equipment not supplied by Sartorius. Information on
operational quality is available upon request from Sartorius.
Only use original Sartorius accessories!
Note the IP protection rating of the scale, the ex-link converter, and the AC adapter.
Do not allow liquid penetration. The protection rating specifies the suitability of
equipment for various environmental conditions (moisture, foreign bodies).
Before cleaning the AC adapter, ex-link converter, or the scale:
Disconnect all devices from the power supply.
The scale and ex-link converter may only be opened by personnel trained by
Sartorius with the power disconnected.
Do not open the AC adapter.
Avoid generating static electricity on the glass panel of the touch screen and plastic
casing. The equipotential bonding conductor of the devices must be connected
properly, according to commonly accepted technical standards.
Only clean the device as stipulated in the cleaning instructions.
Take care that the glass panel of the touch screen is not damaged (e.g., by falling
objects, impact, or extreme pressure).
If the glass panel is damaged, disconnect the device from the power supply
immediately.
The surface of the touch screen should not be touched with pointed, sharp, hard, or
rough objects. You should only use the touch pen provided or your fingertips. Do not
use parts of clothing (e.g., sleeves) or sponges for cleaning because these can scratch
the surface (e.g., due to rivets or buttons in the sleeve, or sand in the sponge).
The device must be protected from unnecessarily extreme temperatures, aggressive
chemical vapors, moisture, shocks, and vibrations. Note the connection data (see
EC Type Examination Certificates for the device and/or the safety instructions,
drawing no. 2023040).