saro DA127, Инструкция по эксплуатации, Страница: 16 / 20

15
REVERSIBILITY OF THE DOOR
Warning: To avoid accidents during the process of changing the door, we recommend that
you get assistance. The glass door is heavy and may cause injury if dropped.
- Depending on to the model and the type of handle your Steak Ager is equipped with, you
may have to rotate the door through 180 degrees.
- Depending on the type of handle your Steak Ager is equipped with, the door may not be
reversible or may require that a left or right opening door be ordered to change the opening
side.
1. To put the cabinet on open operation place, the door opened to the maximum angle
2. Use small knife(2) to take off the decorative nail (1) on opposite side (Drawing 1);
3. Use the inner six angle screwdriver (Tool 5) to disassemble the screws(4) of drop-proof
device (3), then remove the drop-proof device .(Drawing 1)
4. Hold the door, use six angle screwdriver (Tool 5) to screw out the door shaft core(6) from
the two ends of the top of the door. Take out the door and set aside. (Drawing 2)
5. Discharge the upper and lower door hinge(7)(8) by M5 inner six angle screwdriver (Tool
5) , then to assemble the door hinge on the opposite side. (Drawing 3 and 4 )
6. Rotate the door 180 degrees, then Install the door on the opposite side of the cabinet.
(Drawing 5)
7. Finally, install the decorative nail and drop-proof device at the opposite side. (Drawing 6)
1.Decorative nail 2. Knife 3. Drop-proof device
4. M5 six angle 5. M5 six angle screwdriver 6. Door spindle core
7. Upper door hinge 8. Lower door hinge