Insert receiver tube into hitch as shown. For 1.25” receiver, remove (3) -
5mm bolts to disconnect 2” adapter (1-bike model only). Line up hole in
receiver tube with holes in hitch. Install lock washer on hitch pin. Insert hitch
pin on right passenger side of receiver. Thread pin by hand until tight. Slide
hole finder collar up against receiver and clamp lever down. Install lock head.
*To ensure properly tightened, lift front handle of rack and tighten pin until all
play has been removed. Periodically check pin tightness on long trips. A 1/2”
wrench may be used to make installation or removal easier.
EN
2
2”
A
1-1/4”
B
28572A_MTR Instruction Manual.indd 6
2/19/2019 10:21:34 AM