4
351 PARALLEL ARM APPLICATION INSTRUCTIONS
A
B
C
INSTALL DOOR CLOSER TO DOOR WITH SPRING ADJUSTMENT
NUT AWAY FROM HINGE.
7"
9 7/8"
10 1/4"
7 3/8"
120
DIM.
B
DIM.
A
MAX. DOOR
OPENING
180
TOP OF
DOOR
STOP
C OF HINGE PIVOT
DIM. A
L
TOP VIEW
1 1/4"
2 1/2"
5/16"
7/8"
1/2"
DOOR
C OF HINGE PIVOT
(BUTT HINGE SHOWN)
DIM. B
2 3/8"
2 1/2"
#12 WOOD SCREWS
OR #12-24 x 5/8 FLAT HEAD
MACHINE SCREWS
RIGHT HAND
DOOR SHOWN
USING WRENCH ON BOTTOM END OF SPINDLE, ROTATE SPINDLE 45 AND ASSEMBLE MAIN
ARM TO CLOSER AS SHOWN, AND THEN INSERT ROD END INTO SWIVEL ARM AND TIGHTEN
ARM SCREW POSITIONING ARM 1/2" AWAY FROM DOOR.
#12 x 3 WOOD SCREWS OR
#12-24 X 2 1/4" MACHINE
SCREW
9"
RH
CAUTION: DOOR CLOSER
WILL NOT OPERATE
PROPERLY IF ARM IS NOT
INDEXED CORRECTLY.
INDEX MARK
ON SPINDLE
MAIN ARM
LEFT HAND VIEW OF INDEX
PRELOAD
APPROX. 45°
POSITION OF MAIN ARM
WHEN ASSEMBLING
TO SPINDLE
FOOT BRACKET
ARM SCREW
SWIVEL ARM
1/2"
INDEX MARK
ON SPINDLE
RIGHT HAND VIEW OF INDEX
45°
45°
MAIN
ARM
MAIN ARM
ATTACH FOOT BRACKET TO FRAME STOP AND
MOUNT HOLD OPEN ARM TO BRACKET WITH
ADJUSTING NUT FACING DOWN FOR LEFT
HAND, FACING UP FOR RIGHT HAND DOOR.
OPTIONAL FOOT BRACKET FLUSH TRANSOMS.
SEE DATA SHEET ENCLOSED.
PH4 BRACKET
LEFT HAND
DOOR SHOWN
NUT FACES UP
RIGHT HAND
DOOR SHOWN
NUT FACES DOWN
RIGHT HAND DOOR
LEFT HAND OPPOSITE
HOLD OPEN ARM
L
1
2
3
4
5
1
2
3
4
5
LEFT HAND DOOR SHOWN. RIGHT HAND
DOOR OPPOSITE.
1
2
DO NOT USE THIS MOUNTING FOR
“SWING CLEAR” HINGES.
3
THIS DIMENSION IS TAKEN FROM HINGE
EDGE OF DOOR FOR INVISIBLE HINGES.
DRILL & TAP AND USE SCREWS PROVIDED OR USE
MORTISE NUTS WHEN REQUIRED. SEE PAGE 6 FOR
MORTISE NUTS.
NOTE: 351 CLOSER BODIES ARE NON HANDED.
IT IS IMPORTANT THAT THE CLOSER BODY BE
MARKED WITH “RH” SYMBOL AT TOP, FOR RIGHT
HAND DOORS. “LH” SYMBOL AT TOP FOR LEFT
HAND DOORS.
A7341A
Copyright © 2007, 2008, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of
Sargent Manufacturing Company is prohibited.
