Sargent Caravan Reversing Camera Kit, Руководство пользователя

Страница: 8 / 8

Digital Reversing / Rear View Camera System with Satellite Navigation
Issue 1 Page 8 of 8
5 DEALER PDI QUICK REFERENCE - SYSTEM INITIAL SETUP
The Caravan Reversing Camera Kit has been preinstalled in the caravan, but requires the monitor
to be matched to the camera / transmitter before first use.
1. Supply power to the caravan fridge circuit via the 13 pin connector. This is the cooling element
feed which is powered when the car is towing the caravan (pins 10 and 11). If a test set is not
available connect the car and start the engine.
2. Turn the monitor on, and if required connect the power adaptor and wait for the unit to start up.
3. On the menu screen select the Android settings icon .
4. Turn the Wi-Fi setting on by sliding the on-screen switch.
5. Touch the Wi-Fi setting to show a list of available networks.
6. The camera system uses the WIFI_AVIN network, so select this.
7. Touch in the password area and enter the password 12345678 to connect.
8. Touch done and then connect, WIFI_AVIN should then state ‘Connected’.
9. Touch the back button twice to return to the main menu.
10. This is a one off operation. The unit will remember the settings for future use.
11. To test the camera select the camera input on the menu screen .
12. The software will connect to the transmitter and the camera image will be shown on screen.
13. The initial setup procedure is complete.