4. Quick Setup Guide
4.1 Install two AA batteries and a memory card.
• Insert a MicroSDHC memory card into the card slot with the
contacts facing up.
To remove: Press the card to unlock it, then pull it out from
the card slot.
• Unlock the battery compartment. Insert two AA batteries to
the battery compartment according to the polarity indicators
and lock the battery compartment. When it is low battery,
the power indicator turns red, and the unit will turn off
automatically in several minutes. (
Note:
the recording file will
be saved automatically)
4.2 Attach an XLR microphone/cable
Push the microphone or cable connector into the XLR audio
input jack of the SR-VRM1 until it is locked into the place.
Microphone or XLR cable
Release button
4.3 Plug a headphone into the headphone output to monitor the
audio.
The audio can be monitored only on recording screen and
playback screen.
4.4 Long press the power button until the Saramonic startup
screen appears, and the SR-VRM1 is powered on.
The home screen is the recording screen. Press the SET button
to start/pause a recording, long press the SET button to stop
recording and save the file.
