Sapling SMC 3000 Series, Руководство по программированию

Страница: 9 / 12

Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063 Fax: (215) 322-8498 www.Sapling-Inc.com
Page 9
SMC 3000 Series Master Clock Programming Manual
(V3)
There are two advanced programming options, they are "Clock System On/Off" and "Send Numeric Message".
“Clock System On/Off)?”
- This allows the customer to control the power sent to the clock systems. This func-
tion would be used to turn off the power if you wanted to perform maintenance on the slave clocks without turn-
ing off the entire system.
“Send Numeric Message?”
- Only for use with a digital clock system. When used with Sapling SBD Series digi-
tal clocks, the master can send numeric messages to individual clocks, or groups of clocks, which have been as-
signed individual “addresses” by the technician prior to installation. If you wish to “silently page” someone by
flashing a code onto a specific digital clock location, this function allows you to send such a message.
Advanced Options
Technician Mode
Type in the technician password: 6063
There are 46 different addresses in the Technician Mode. The addresses are as follows:
Address Description Address Description
000 Customer Password 032 Duration 1 for Zone 4
004 Select clock system 034 Duration 2 for Zone 4
005 Select clock system 036 Duration 1 for Zone 5
006 Clock system on/off 038 Duration 2 for Zone 5
007 Enable numeric messaging 040 Duration 1 for Zone 6
008 Send BELL message Zone 1 042 Duration 2 for Zone 6
009 Send BELL message Zone 2 044 Duration 1 for Zone 7
010 Send BELL message Zone 3 046 Duration 2 for Zone 7
011 Send BELL message Zone 4 048 Duration 1 for Zone 8
012 Send BELL message Zone 5 050 Duration 2 for Zone 8
013 Send BELL message Zone 6 052 Duration 1 for Zone 9
014 Send BELL message Zone 7 054 Duration 2 for Zone 9
015 Send BELL message Zone 8 056 Duration 1 for Zone 10
016 Send BELL message Zone 9 058 Duration 2 for Zone 10
017 Send BELL message Zone 10 060 Duration 1 for Zone 11
018 Send BELL message Zone 11 062 Duration 2 for Zone 11
019 Send BELL message Zone 12 064 Duration 2 for Zone 12
020 Duration 1 for Zone 1 066 Duration 2 for Zone 12
022 Duration 2 for Zone 1 069 Enable Daylight Savings Time
024 Duration 1 for Zone 2 071 Keyboard time-out
026 Duration 2 for Zone 2 078 RS485 transmission rate
028 Duration 1 for Zone 3 079 Self test
030 Duration 2 for Zone 3 080 Reset to default values