Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: (215) 322-6063
Fax: (215) 322-8498 www.Sapling-Inc.com
Page 10
SMC 3000 Series Master Clock Programming Manual
(V3)
Technician Addresses
Customer Password
Address 000: This address allows the customer password to be modified. The default value
is 1111. This password can be any four (4) characters.
Sync-Wire Clock System Selection
Address 004: This address controls Clock System #1 (000 is off, default value is 006)
Address 005: This address controls Clock System #2 (000 is off, default value is 001)
Please see the SMC 3000 Installation Manual for more information on sync-wire codes.
Clock System On/Off
Address 006: This address controls the Clock System.
000 = Disabled
001
=
Enabled
(default
value)
002
=
Manually
control
the
power
Send Numeric Message
Address 007: This address enables/disables the numeric messaging function. This function
can only be used when running a wired digital clock system using the SBD 1000 or 2000 and
the SBZ series digital clocks. Numeric messaging allows the customer to send a numeric
message to individual clocks, to a group of clocks in the system, or to all the clocks.
000 = Disabled (default value)
001
=
Enabled
Send Bell Message
Address 008 - 019: This address enables/disables the Bell message function. This function
can only be used when running a wired digital clock system using the SBD 1000 or 2000 and
the SBZ Zone. When enabled, the BELL function will send the word “BELL” through the
RS485 when the selected zone(s)’ relay closes. Addresses 008 through 019 turn on or off
this option for each relay/zone in the master clock.
001 = Enabled
002
=
Disabled
(default
value)
Duration Settings For Zones
Address 020 - 066:
These addresses allow the user to set the desired duration of the relay
closure from 1 - 3600 seconds. Addresses 020 - 034 control the standard four (4) zones. Ad-
dresses 036 - 066 control the optional eight (8) relays that are available. Each zone has the
option for two (2) saved durations. The user can enter a number from 0001 to 3600 (seconds)
to denote the duration of the closure.
