_
English
_
JUICING
1.
Before using, please confirm the button switch of the main machine is in stop state. In this
way, in case assembly is not completed, starting the main machine can be avoided, so
unnecessary damage of the appliance and personal injuries are avoided.
2.
Before juicing, first confirm that the juicing net and rotor are clutched in position, and that
there is no hard contact between the juicing net cutter and the transparent cover. Put the
transparent cover on, put the handle into the cover slot, and then turn on the machine.
3.
For using, assemble according to the diagram of "Description of Appliance ". Turn on power
supply, press the switch to let the machine run with no load for 5 sec. Put prepared vegetable
or fruit into feed port of the juicer, press with the pushing bar, evenly and slowly. Juice of
the vegetable or fruit can be found, original, fresh and good for health.
4.
Note:
When pressing food with the pushing bar, force shall be even or indirect, pressing
force shall not be more than 1 kg, and not too sudden, otherwise juicing effect will be
reduced.
OPERATING TIME
This machine is designed with button switch (O for stop, I for weak grading, II for strong grading).
For juicing, select strong grading. Operate the machine for 1 min and then stop for 1 min before
continue using. After the above operation is performed for three times, stop for 15 min. Do not
operate until the motor is cooled down. In this way, service life of this machine will be prolonged
and the machine will serve you more efficiently.
MAINTENANCE AND CLEANING
1.
This machine shall be often used, so as to keep the motor dry and clean.
2.
If not using for a long time, please store this machine at a dry and well-ventilated place so as
to prevent the motor from being damped and going moldy.
3.
Do not immerse the main machine in water or other liquid. Only wipe with damp cloth.
Other components may be washed directly with water, such as pushing bar, cover, middle
seat, residue cup, juice cup.
