_
English
_
OPERATION
1. Plug in the power cord. Make sure that the contact can withstand at least 10 Amperes of
current and is properly grounded;
2. Turning clockwise switch operation (1), set the function you want. The modes of the switch
are as follows:
0 - off heaters;
1 - inclusion of two heater (800W);
2 - inclusion of four heater (1600W).
3. The unit will work and the heaters will slowly begin to heat. Note that the surface
temperature of the glass of each of the four heating elements will increase from 0 to 500 ° C for
no more than 2-3 minutes.
4. If you wish, you can use the humidity system built into the appliance. For this purpose, even
before you include the unit in the mains, pour water through the inlet pipe (3) of the humidity
system. Do not fill above the maximum level indicated on the water tank. Permanent monitor the
level of water in the humidifier system. When the water drops below the minimum pour again as
previously ALWAYS unplug the appliance;
5. If you do not want to use the humidity system, leave the switch off;
6. Your heater is equipped with a safety switch for working position (7).This is a safety system
stops the operation of the unit if it is not placed upright or lifted in the air;
7. Your heater is equipped with a fan, which supports the rapid distribution of air in the room.
It is activated automatically when you turn on the heaters
MAINTENANCE
The appliance needs only an external regular cleaning.
After use and before cleaning always unplug the appliance and wait till the item is cool.
Clean the grilles from dust.
Do not clean the painted parts with emery flour or solvents and use only a moistened cloth.
DANGER! Never immerse the device in water or other liquids;
Never place the unit under running water or another liquid;
Do not let dirt and liquids dry on the body of the unit;
To clean the unit do the following:
1. If turned on, unplug the appliance;
2. Allow the unit to cool completely;
3. Wipe the outside of the appliance and metal grille over heater with a soft damp cloth
(not dripping water on it);
4. Dry the device before use.
Keep the device in a dry and safe place away from children. If possible, store the device in
its original packaging.
