_
English
_
malfunction.
CAUTION!
1.
When not using the appliance, please unplug the power plug.
2.
Please keep the appliance clean, lest cockroaches and small insects enter inside and cause a
short circuit.
3.
Do not clean with water directly or put it in water.
4.
When the plate and bottom are dirty, continued use will burn the dirt and it will be more difficult
to be cleaned.
5.
If the power cord or plug is damaged, it must be replaced by the manufacturer or the authorized
service center in order to avoid a hazard.
MALFUNCTION CHECK WARNINGS AND SOLUTION
PHENOMENON
CHECK
1. The appliance is plugged in, but there
is no beeping sound. No lights are on
after pressing the ON/OFF button.
Check whether the plug is in good condition.
Check the fuse.
Check whether the electricity was cut off.
2. Induction cooker send out beeping
sound.
Check whether the pot is proper or not.
Check whether the pot is sitting in the center of
the plate or not.
Check whether the diameter of the pot is bigger
than 12cm or not.
3. Warning with E1
Check if the voltage is too low.
Check whether the socket is loose.
Check if the line diameter is too small.
4. Warning with E2
Check if the voltage is too high.
5. Suddenly stopped heating during
cooking, warning with E5
Check whether the environment temperature is
very high or not.
Check whether there is some block on the air inlet
or outlet. Whether the fan is working or not.
Check whether the keep warm temperature is
already reached the temperature set or not.
Check if the fan is still working, it maybe the
adjustment of the unit itself, try it again after 10
minutes.
6. Warning with E4
Check if the thermostat is broken.
7. Warning with E6
Check if the radiator is broken.
