Sapido RM-1802, Руководство пользователя

Страница: 44 / 49

http://www.sapido.com.tw/ User Manual v1.0.0 44
A: DHCP is commonly used in the large local network. It allows you to manage and
distribute IP addresses from 2 to 254 throughout your local network via ADSL2/2+
Broadband Router. Without DHCP, you would have to configure each computer
separately. It’s very troublesome. Please Open Internet browser > Input
192.168.1.1 in the website blank field > Select DHCP Server under the IP Config
Menu .
3. Q: How do I upgrade the firmware of ADSL2/2+ Broadband Router?
A: Periodically, a new Flash Code is available for ADSL2/2+ Broadband Router on your
product supplier’s website. Ideally, you should update ADSL2/2+ Broadband
Router’s Flash Code using Firmware Upgrade on the System Management menu
of ADSL2/2+ Broadband Router Settings.
4. Q: Why is that I can ping to outside hosts, but cannot access Internet websites?
A: Check the DNS server settings on your PC. You should get the DNS servers settings
from your ISP. If your PC is running a DHCP client, remove any DNS IP address
setting. As the router assign the DNS settings to the DHCP-client-enabled PC.
5. Q: ADSL2/2+ Broadband Router couldn’t save the setting after click on Apply
button?
A: ADSL2/2+ Broadband Router will start to run after the setting finished applying, but
the setting isn’t written into memory. Here we suggest if you want to make sure the
setting would be written into memory, please reboot the device via Rebo ot under
System Management directory .