Sapido RM-1802, Руководство пользователя

Страница: 41 / 49

http://www.sapido.com.tw/ User Manual v1.0.0 41
Chapter 5 Q & A
5.1 Installation
1. Q: Why does the throughput seem slow?
A: To achieve maximum throughput, verify that your cable doesn’t exceed 100 meter. If
you have to do so, we advise you to purchase a bridge to place it in the middle of the
route in order to keep the quality of transmitting signal. Out of this condition you
would better test something else.

Verify network traffic does not exceed 37% of bandwidth.

Check to see that the network does not exceed 10 broadcast messages per
second.

Verify network topology and configuration.
5.2 LED
1. Why doesn’t ADSL2/2+ Broadband Router power up?
A: Check if the output voltage is suitable, or check if the power supply is out of order.
2. The Internet browser still cannot find or connect to ADSL2/2+ Broadband Router
after verifying the IP address and LAN cable, the changes cannot be made, or
password is lost.
A: In case ADSL2/2+ Broadband Router is inaccessible; you can try to restore its
factory default settings. Please press the “Reset” button and keep it pressed for over
10 seconds and the light of STATUS will vanish. The LEDs will flash again when
reset is successful.
3. Why does ADSL2/2+ Broadband Router shut down unexpectedly?
A: Re-plug your power adapter. Then, check the STATUS indicator; if it is off, the
internal flash memory is damaged. For more help, please contact with your provider.
5.3 IP Address
1. Q: What is the default IP address of the router for LAN port?
A: The default IP address is 192.168.1.1 with subnet mask 255.255.255.0