4.10 System Management
This section including Wake on LAN, Change Username/Password, Upgrade Firmware,
Profiles Save, Remote Management, Time Zone, UPnP, Route Setup, VPN Passthrough,
and Wan Type Auto Detection. It is easy and helpful for users making more detailed
settings
.
4.10.1
Wake on LAN
Switch your computer ON through your LAN or the Internet . To support WOL you must
have a computer with Motherboard that supports WOL, as well as a Network Controller
(NIC) supporting this function. Most of the newer Motherboard (circa 2002 and On), have
an On Board NIC that supports WOL. Otherwise you need to install a PCI NIC that is
WOL capable.
4.10.2
Change Password
Users can set or change user name and password used for accessing the web
management interface in this section.
Input User Name and New Password, then input Confirm Password again.
4.10.3
Firmware Upgrade
Please refer
4.10.4
Profiles Save
Users can create a backup file that contains current router settings. This backup file can
be used to restore router settings. This is especially useful in the event you need to reset
the router to its default settings.
