Item
Description
Disable Wireless
Turn off the wireless service.
Band-2.4GHz
Select the frequency. It has 6 options: 2.4 GHz
(B/G/N/B+G/G+N/B+G+N).
Band-5GHz
Select the frequency. It has 6 options: 5 GHz
(A/N/A+N/AC/N+AC/A+N+AC).
Mode
Select the mode. It has 3 modes to select: (AP, Client,
WDS, AP+WDS).
Multiple AP: Please check Section 4.1.2.1.
* In Wi-Fi AP mode only support Client mode.
Network Type
•
Infrastructure
:
one of the two methods for
connecting to wireless networks with Wi-Fi
enabled devices such as laptops, Pda’s I-phone
etc. These devices are connected to wireless
network with the help of Access point (AP).
Wireless Access Points are usually routers or
switches which are connected to internet by
Ethernet port.
•
Ad hoc
:
By using ad hoc mode, devices are
capable for communicating directly with each
other. No Access point (routers / switches) is
required for communication between devices
and all devices in the range connect in peer to
peer communication mode.
SSID
Service Set identifier, users can define to any or keep
as default.
Channel Width
Please select the channel width, it has 3 options:
20MHz / 40MHz / Auto
Control Sideband
Enable this function will control your router use lower or
upper channel.
Channel Number-2.4GHz
Please select the channel; it has Auto, 1, 2~11 or 13
options.
Channel Number-5GHz
Please select the channel; it has Auto,
3 6
,
4 0
,
4 4
,
4 8
,
1 4 9
,
1 5 3
,
1 5 7
,
1 6 1
options.
Broadband SSID
User may choose to enable Broadcast SSID or not.
WMM
Enable / Disable Wi-Fi Multimedia
Data Rate
Please select the data transmission rate.
Associate Clients
Check the AP connectors and the Wireless connecting
status.
Enable MAC Clone
(Single Ethernet Client)
Clone the MAC address for ISP to identify.
Enable Universal
Repeater Mode (Acting
as AP and Client
simultaneously)
Allow to equip with the wireless way conjunction upper
level, provide the bottom layer user link in wireless and
wired way in the meantime.
(The IP that bottom layer obtains is from upper level.)
Please also check Section 4.1.2.2
SSID of Extended
Interface
While linking the upper level device in wireless way,
you can set SSID to give the bottom layer user search.
Multiple AP
BR261c can register up to 4 SSIDs (wireless LAN