§ Fins, Cockpit, Canopy and Decals
48
Viper Jet MKII Composite
Completed canopy assembly
}}}}
If you would like the instrument panel for the
pilot to be visible from the main cockpit you can
cut a hole in the main cockpit as shown in the
image below; this will give the airplane a more
scale appearance.
Scale cutout in main cockpit
Apply Decals
Required Parts
o
o
o
o
Completed Airplane
o
o
o
o
Decals [D]
Required Tools and Adhesives
®
®
®
®
Low Tack Tape
}}}}
To apply the decals first remove the surrounding
waste around the decals leaving only the parts
which will be applied to the airplane.
Decal ready to be applied to airplane
}}}}
Place a piece of low tack tape over the decal;
this will hold the pieces of the decal together as
you apply it to the airplane.
Place a piece of low tack tape on the decal
}}}}
Remove the backing from the decal.
Remove the backing from the decal
}}}}
Place the decal on the fuselage in the desired
position.
The decals are water-slide decals so if you like