background image

5

Safety Instructions

All the safety and operating instructions should be read before 
the product is operated.

Read  all  of  the  instructions  given  here  and  retain  them  for 
later use. Unplug this projector from AC power supply before 
cleaning.  Do  not  use  liquid  or  aerosol  cleaners.  Use  a  damp 
cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm, 
or  when  it  is  left  unattended  and  unused  for  long  periods  of 
time, unplug it from the wall outlet. This will prevent damage 
due to lightning and power line surges.

Do not expose this unit to rain or use near water... for example, 
in a wet basement, near a swimming pool, etc...

Do  not  use  attachments  not  recommended  by  the 
manufacturer as they may cause hazards.

Do  not  place  this  projector  on  an  unstable  cart,  stand,  or 
table.  The projector may fall, causing serious injury to a child 
or  adult,  and  serious  damage  to  the  projector.  Use  only  with 
a  cart  or  stand  recommended  by  the  manufacturer,  or  sold 
with  the  projector. Wall  or  shelf  mounting  should  follow  the 
manufacturer's  instructions,  and  should  use  a  mounting  kit 
approved by the manufacturers.

An  appliance  and  cart  combination 
should be moved with care. Quick stops, 
excessive force, and uneven surfaces may 
cause the appliance and cart combination 
to overturn.

Slots and openings in the back and bottom of the cabinet are 
provided  for  ventilation,  to  ensure  reliable  operation  of  the 
equipment and to protect it from overheating.

The  openings  should  never  be  covered  with  cloth  or  other 
materials,  and  the  bottom  opening  should  not  be  blocked 
by  placing  the  projector  on  a  bed,  sofa,  rug,  or  other  similar 
surface. This projector should never be placed near or over a 
radiator or heat register.

This  projector  should  not  be  placed  in  a  built-in  installation 
such as a book case unless proper ventilation is provided.

Never  push  objects  of  any  kind  into  this  projector  through 
cabinet  slots  as  they  may  touch  dangerous  voltage  points 
or short out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the projector.

Do  not  install  the  projector  near  the  ventilation  duct  of  air-
conditioning equipment.
This projector should be operated only from the type of power 
source  indicated  on  the  marking  label.  If  you  are  not  sure  of 
the type of power supplied, consult your authorized dealer or 
local power company.

Do not overload wall outlets and extension cords as this can 
result in fire or electric shock. Do not allow anything to rest on 
the  power  cord.  Do  not  locate  this  projector  where  the  cord 
may be damaged by persons walking on it.

Do  not  attempt  to  service  this  projector  yourself  as  opening 
or  removing  covers  may  expose  you  to  dangerous  voltage 
or  other  hazards.  Refer  all  servicing  to  qualified  service 
personnel.

Unplug  this  projector  from  wall  outlet  and  refer  servicing  to 
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d.  If  the  projector  does  not  operate  normally  by  following 

the  operating  instructions. Adjust  only  those  controls  that 
are  covered  by  the  operating  instructions  as  improper 
adjustment of other controls may result in damage and will 
often  require  extensive  work  by  a  qualified  technician  to 
restore the projector to normal operation.

e.  If the projector has been dropped or the cabinet has been 

damaged.

f.  When the projector exhibits a distinct change in performance 

this indicates a need for service.

When  replacement  parts  are  required,  be  sure  the  service 
technician  has  used  replacement  parts  specified  by  the 
manufacturer that have the same characteristics as the original 
part.  Unauthorized  substitutions  may  result  in  fire,  electric 
shock, or injury to persons.

Upon  completion  of  any  service  or  repairs  to  this  projector, 
ask the service technician to perform routine safety checks to 
determine that the projector is in safe operating condition.

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY 
AND MUST BE RECYCLED OR DISPOSED OF ACCORDING 
TO LOCAL, STATE OR FEDERAL LAWS.

Содержание XGA ULTRA SHORT-THROW PLC-XL51














































































Отзывы: