Sanyo VSP-8000, Руководство по обслуживанию

Страница: 7 / 22

- 7 -
OK Cancel
Connection Description
? X
Name:
Icon:
? X
Change Icon..
Country code:
Area code:
Phone number:
Connect using:
Configure..
OK
Cancel
Connect To Settings
Direct to Com1
OK Cancel
COM1 Properties
? X
Bits per second:
Data bits:
Parity:
Stop bits:
Flow control:
Restore Defaults
Advanced...
Hardware
Port Settings
Open
Send Text File ? X
Look in:
File name:
Cancel
Files of type: All files (*.*)
34800
8
None
2
∗∗
Properties
3. REWRITING THE SOFTWARE
3-1. Setting up the computer
Use the Hyper Terminal which is compatible with Windows 95
, 98 or other.
1. Connect the RS-232C connector with the RS-232C con-
nector on the computer using an interlink serial interface
cable. Then turn on the power and start Windows 95 , 98 or
ohter.
2. Open Windows Explorer, and then run the file \Program
Files\Accessories\Hyper Terminal\Hypertrm.exe.
The Connection Description window appears.
3. Click the Cancel button in the Connection Description win-
dow, or enter your name and then click the OK button.
The Hyper Terminal window appears.
4. Click the File (F) button in the Hyper Terminal window, and
then click the Properties (R) button.
The Properties dialog box appears.
5. In the Properties dialog box, set Connect using (N) in Phone
Number to “Direct to COM”, and then click the Configure
(F) button.
The port Setting window of the COM1 Properties dialog box
appears.
6. In the Port Settings window, change the settings to match
the controller.
Speed: 4800, 9600, 19200 or 38400
Data bits: 8
Parity: None
Stop bits: 2
Flow control: Hardware
7. Click the OK button.
The Properties dialog box appears.
8. Click the OK button in the Properties window.
The Hyper Terminal window appears.
9. Click the Transmit (T) button in the Properties dialog box,
and then click the Send Text File (T) button.
The Send Text File dialog box appears.
10. Set File of Type (T) to “All files (*.*)”, and type the name of
the file to be transferred in File name (N).
This completes the computer settings.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
RS-232C
CONNECTOR
RESET
RS-232C
CONNECTOR
JK-405
BUTTON