Sanyo VPC-X1200, Инструкция по эксплуатации

Страница: 20 / 72

11
English
CHARGING THE BATTERY PACK
HINT
About the internal backup battery
i
This camera’s internal battery serves to maintain the date and time
settings, as well as the shooting settings. The backup battery will be fully
charged when the battery pack is kept in the camera continuously for about
2 days. In the fully charged state, the backup battery will maintain the
camera settings for about 7 days.
When not using the camera for a long time, remove the battery pack
i
A small amount of power is still used even if the digital camera is turned off,
and it is therefore recommended that the battery pack be removed from the
camera if it is not going to be used for a long time. Note that when the
battery pack is removed for a long period, the time and date settings may
be cleared. Before using your camera again, be sure to confirm that the
camera settings are correct.
To prolong the life of the battery pack
i
Although the battery pack is an expendable item, you can maximize the life
of the battery by heeding the following suggestions.
h
Do not leave the battery under the hot summer sun or exposed to other
high-temperature environments.
h
Do not continually recharge the battery when it is already fully charged.
After fully charging it once, for example, use it for a while to partially
discharge it before charging it again.
h
When the battery is not to be used for a long time, if possible store the
partially charged (not fully charged) battery in a cool environment.