TURNING THE POWER ON/OFF
Turning the Power On
Follow the steps indicated below when capturing images or when playback images on the LCD
monitor.
To capture images
1
Set the main switch to “MONITOR OFF” or “CAMERA.”
“MONITOR OFF”: To not use the LCD monitor.
“CAMERA”:
To use the LCD monitor.
2
Open the lens cover.
œ
The power is turned on.
œ
The stand-by indicator lights green in the viewfinder
window.
œ
If the main switch was set to “CAMERA” in step 1, the
LCD monitor will turn on and an image will appear.
To playback images
1
Set the main switch to “PLAY.”
œ
The power is turned on.
œ
An image appears in the LCD monitor.
œ
Images can be played back whether the lens cover is
opened or closed. However, to protect the lens, we
recommend that you keep the cover closed.
HELP
If “NO CARD” appears
œ
If no card is installed in the digital camera, then “NO CARD” will appear in the LCD monitor. Be
sure to install a card before using the digital camera (see page 25).
PLAY
CAMERA
MONITOR OFF
PLAY
CAMERA
MONITOR OFF
Main switch
Main switch
Stand-by indicator
PLAY
CAMERA
MONITOR OFF
Main switch
SX114/EX, /E, /U (VPC-SX560EX, VPC-SX560E, VPC-SX560 GB) Wed. Nov., 15/2000
27
English