Sanyo VPC-S1213, Инструкция по эксплуатации

Страница: 33 / 46

EN-32
Color
This sets the color of the image that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
Saturation
This sets the saturation of the image that will be captured.
* High / Standard / Low
Metering
This sets the metering method for calculating the exposure.
Capture Md.
This sets the recording method at the time of capturing images.
Quick Shot
If this function is set to “On”, the camera takes a quick shot without focusing.
* On / Off
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Find Blur
Refer to the section in this manual titled “Find Blur” for further details.
* On / Off
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
Setup
Refer to the section in this manual titled “Setup Menu” for further details.
* Center: Averages the light metered from the entire frame, but gives greater
weight to the subject matter at the center.
* Spot: A very small portion of the center of the screen is measured to calculate
the correct exposure.
* Average: The exposure is measured all of the image area.
* Single: Captures one image at a time.
* Continuous: Permits continuous capture of up to 3 images.
* AEB:
Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* Album Shot: Creates an album-like layout to combine 3 shots into a single image.