Sanyo VPC-S1213, Инструкция по эксплуатации

Страница: 44 / 46

EN-43
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
„ Select the image that you want to print with
the
e / f buttons.
„ Select the print number (up to 99) with the
c / d buttons.
„ After selecting the desired image and
printing number, press the
SET button to
confirm.
4. Select [Exit] with the
c
/
d
buttons, and press
the SET button.
5. Select [Print] with the c / d buttons, and press
the SET button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
„ [COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
„ If an error is detected during the connection
(i.e. a printer hardware problem) between
camera and printer, [PRINT ERROR] will
be displayed.
„ If an error is detected during the
communication (i.e. wrong setting on the
camera) between camera and printer, [ERROR] will be displayed.
„
The image printing may fail if the power to the camera is cut off.
; ;
0 0
;
;