Sanyo VPC-CG6BL, Инструкция по эксплуатации

Страница: 18 / 26

English
16
k
Macintosh
1
Set the camera to the card reader mode (page 8).
h
The [XACTI_CG6] (or [CG6_INT] in case of the camera’s internal
memory) icon will appear on the desktop.
2
Open the folder in which Photo Explorer was installed, and double-
click on the Photo Explorer program icon.
h
Run Photo Explorer.
3
Click on the digital camera wizard icon on the toolbar.
h
The [Digital Camera Wizard] dialog box will open.
4
Click on the icon in the [Camera flash disk drive] section.
h
The [Choose Removable Drive] dialog box will open.
5
Click on the drive for the camera connected to your computer
(XACTI_CG6) (or [CG6_INT] in case of the camera’s internal
memory), and click on the [Select] button.
h
The drive name in the [Camera flash disk drive] section is changed to
[XACTI_CG6] (or [CG6_INT] in case of the camera’s internal
memory).
6
Turn ON the [Create subfolder] checkbox.
h
If you wish to now read the data from the card installed in the camera,
click on the [Start] button.
h
If instead you wish to discontinue after changing the settings, click on
the [Cancel] button.