background image

-

 4

 -

A
B

C   D   E

F

G

H

165

165

(Tilt)

100 (3.9)

5

25

(Lift)

(Swivel)

SPECIFICATIONS

Display type :

 SXGA a-Si TFT LCD

Color system :

 PAL/NTSC (Automatic detection)

LCD display :

 17” active matrix TFT LCD panel

Viewable size (H x V) :

 338 x 270 mm/13.3 x 10.6 in. (4:3)

Pixel pitch (H x V) :

 0.264 x 0.264 mm/0.01 x 0.01 in.

Horizontal resolution :

 1280 x 1024, 500 TV lines or more (Y/C input mode)

Viewing angle degree :

 Left/Right/Up/Down: 80°

Scanning frequency :

 Horizontal 31k - 82kHz, Vertical 50 - 77 Hz

Contrast ratio :

 1000:1

Brightness :

 300 cd/m    / 359 cd/yd

Response time Tr/Tf :

 1.3/3.7 ms

Display color :

 1,670 M

Display monitor timing :

 VESA compatible (VGA mode)

Display mode :

 VIDEO A,  VIDEO B, S-VIDEO, VGA

Input connector
    Video signal (BNC IN) :

 Composite sync signal, 1.0 Vp-p, 75 ohms BNC connector x 2

    S-Video signal (Y/C IN) :

 Separate Y/C signal, mini-DIN connector

                                              Y signal : 1.0 Vp-p, 75 ohms negative sync
                                              C signal : 0.286 Vp-p, 75 ohms negative sync

    Audio signal (AUDIO IN) :

 -6.0 dBs (400 mVrms), 2W (1W + 1W) stereo, RCA pin x 2

    VGA signal (VGA IN) :

 VGA monitor connector (15-pin)

                                         Red signal, Green signal, Blue signal : 0.7 Vp-p, 75 ohms positive sync

Output connector
    Video signal (BNC OUT) :

 Composite sync signal, 1.0 Vp-p, 75 ohms BNC connector x 2

    S-Video signal (Y/C OUT) :

 Separate Y/C signal, mini-DIN connector

                                                  Y signal : 1.0 Vp-p, 75 ohms negative sync
                                                  C signal : 0.286 Vp-p, 75 ohms negative sync

Menu language :

 English/ French/ German/ Spanish/ Italian/ Russian/ Swedish/ Portuguese/ Korean/ Chinese/

Menu language :

 

Japanese

Power input :

 AC 100 V - 240 V/ 0.7 A

Operating condition :

 Temperature :  -10°C - +40°C/14°F - 104°F

                                     Humidity

 :

 10 - 80 % (non-condensation)

Storage condition :

 Temperature : -20°C - +45°C/-4°F - +113°F

                                 Humidity

 :

 5 - 95 %

Power consumption :

 Approx. 42 W

Weight :

 Approx. 6.0 kg/13.2 lbs.

Dimensions :

2

2

About the tilt adjustment

When adjusting the screen tilt, use a soft cloth to prevent damaging the screen.

After adjusting the tilt, check the cables to ensure the monitor is not pulled over.

      A                 B                 C              D               E                 F              G               H

371 (14.6)  339 (13.4)  272 (10.7)  331 (13.0)  368 (14.5)   37 (1.5)    67 (2.6)   220 (8.7)

Unit: mm (inch)

Содержание VMC-L2017P









Отзывы: