FUNCTIONS
Preset memory function
The preset memory function will memorise camera positions and
zoom, focus, etc. settings. Up to 255 preset camera positions
can be memorised. Later, you can easily recall any of the preset
camera positions by entering its corresponding number, and the
camera will move to the memorised position with all the preset
settings.
Home position
The camera position preset as number 1 is called the “Home
position”.
•
Use the home position as the normal camera position.
Moving to a preset position
When camera positions have been preset, you can enter a
memorised camera position number (ex.: 25), using the numeric
keypad buttons on the system controller to select it. The camera
will set itself to the select preset position.
Pan/tilt function
The pan function will move the camera on an horizontal plane, to
a surveillance position.
The tilt function will move the camera on a vertical plane, to a
surveillance position.
Auto pan function
The auto pan function allows you to have the camera move back
and forth automatically, at a preset speed, between the 2 preset
camera positions memorised in numbers 7 (start position) and 8
(end position).
•
Before this function can be used, the auto pan start position
(No. 7) and the auto pan end position (No. 8) must be preset.
When the auto pan function is started
1
The camera will move from its actual position to the auto pan
start position (No. 7).
2
The camera will move from the auto pan start position (No. 7)
to the auto pan end position (No. 8).
Note: The camera will turn counterclockwise when moving
from the start position to the end position.
3
The camera will move back from the auto pan end position
(No. 8) to the auto pan start position (No. 7).
4
Steps 2 and 3 are repeated.
Preset position No. 1 (Home position)
No.1
No.25
Preset position No. 25
No.7
Preset position No. 7
No.8
No.7
Preset position No. 7
Preset position No. 8
No.8
No.7
Preset position No. 7
Preset position No. 8
L53Y4/XE (VCC-9250P GB) 2000. 11. 28
6
