SETTINGS
White balance adjustment
Normally the switch
9
(
WB
) is set to the down (
ATW
) position and
the white balance is adjusted automatically. If a manual white balance
adjustment is necessary, follow the steps below.
Set the switch
9
(
WB
) to the up (
MWB
) position, then adjust the
colour.
•
Turn
RED
(VR302) to set the red ratio and/or
BLUE
(VR303) to set
the blue ratio.
Sync setting
LL:
Line-Lock
Synchronizes the unit with power frequency when two or more
cameras are connected via a switcher unit.
When the image on the monitor rolls vertically, adjust the phase.
•
If using this unit as the second or subsequent camera;
Adjust the roll by turning the LINE PHASE dial.
•
If using this unit as the first camera;
Adjust the roll using the phase adjuster on the second and
subsequent cameras.
INT:
Internal sync
9
VR302
VR303
RED
BLUE
10
English
11
