manualshive.com logo in svg

Sanyo TLS-9072, Инструкция по эксплуатации

Поделиться
Скачать
Sanyo TLS-9072 Скачать руководство пользователя страница 30

SPECIAL PLAYBACK

Picture Search (Forward and Reverse)

1

Press the FF (or REW) button, during normal
playback.

ø

The image can be seen while the tape is
advanced (or rewound) at high speed.

2

To return to normal playback, press the PLAY button.

NOTES:

X

During picture search, noise (horizontal bars) will
appear in the picture.

X

The sound is muted.

Still Image

1

Press the STILL/PAUSE button, during normal
playback.

ø

A still image can be viewed.

2

To return to normal playback, press the PLAY button.

NOTES:

X

If still mode continues for 5 minutes or more, the VCR
will go into stop mode to avoid damaging the tape.

X

If the image is unstable (rolling vertically), adjust the
vertical lock control to correct.

Field Advance

1

Press the FF (or REW) button, during still image
mode.

ø

The still image is advanced (or rewound) of one
image (field).

2

To return to normal playback, press the PLAY button.

NOTES:

X

During reverse field advance, noise will appear in the
picture.

X

If field advance mode continues for 5 minutes or more,
the VCR will go into stop mode to avoid damaging the
tape.

Reverse Playback

1

Press and hold the REV button, during normal
playback.

ø

Reverse playback will start.

2

To return to normal playback, release the REV button.

NOTES:

X

During reverse playback, noise will appear in the
picture.

X

Reverse playback is only possible during 2-hour
playback speed mode.

X

The sound is muted.

RC4Q/NA2 (TLS-9072 GB)  Thu. Sept., 07/2000

English

29

Содержание TLS-9072










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды